Sn0wbreeze Update Here Tạo Firmware Custom cho iPhone
What is New?
Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices). The 6.0/6.0.1 is currently a tethered based jailbreak via iBooty (except for iPhone 3GS old bootrom users). SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo]). Kudos @sbingner! Downgrading: Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected. Remember to enter a PWNED DFU state with sn0wbreeze's iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW! iREB & iOS 6: Due to some changes in iOS 6, the current public standalone version of iREB will NOT enter a proper PWNED DFU state for restoring to custom iOS 6 IPSWs. An update for the standalone version should come sometime this week. In the meantime, use the iREB tab located in sn0wbreeze's top status bar to enter a proper PWNED DFU state. A5(X)/A6(X) Support?: As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public. A5(X)/A6(X) Baseband Preservation/Hacktivation? For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier's SIM (the one its locked to obviously) on ****. The SIM does not have to be active with the carrier to activate the phone. Known Bugs/Issues: Windows 8 users currently need to use this NET Framework to run sn0wbreeze. iPad baseband will fail to flash on iOS 4.0 --> iOS 4.2.1 restores. |
Phiên bản cập nhật Sn0wbreeze v2.9.7, hỗ trợ cho iOS 6 / iOS 6.0.1 các thiết bị Pre-A5 như iPhone 4, iPhone 3GS và iPod touch thế hệ thứ 4.
Thực hiện theo từng bước dưới đây để đạt được một tethered jailbreak iOS 6.0.1 bằng cách sử dụng công cụ Jailbreak Sn0wbreeze cho Windows. Trước khi thực hiện bạn nên nhớ đây chỉ là một jailbreak tethered. Xem video hướng dẫn [video=youtube;Gi22Ek4xvNo]http://www.youtube.com/watch?feature=player_embedded&v=Gi22Ek4xvNo#t=0s[/video]
Ngoài ra, bạn cũng có thể sử dụng Redsn0w của Dev Team iPhone để jailbreak 6.0.1 trên các thiết bị A4 gồm iPhone và iPod touch.Làm thế nào để jailbreak iOS 6.0.1: Bước 1: Tải phiên bản mới nhất của Sn0wbreeze ( từ đây ) cho Windows và lưu các tập tin ở một vị trí quen thuộc trên máy tính của bạn. Tải về iOS 6.0.1 cho thiết bị của bạn.
Bước 3: Chạy ứng dụng Sn0wbreeze trên máy tính Windows của bạn. Bước 4: Click vào nút mũi tên màu xanh bên cạnh để tiếp tục. Chọn Browse cho IPSW, chỉ vào Sn0wbreeze để chọn tập tin firmware thích hợp với iPhone của bạn. Bước 5: Chọn Simple Mode từ danh sách có sẵn các chế độ và tiếp tục nhấn vào nút kế tiếp để tạo một custom firmware tùy chỉnh. Sn0wbreeze sẽ tạo ra một tập tin firmware được xây dựng tùy chỉnh. Khi hoàn tất, tập tin firmware được tạo nằm trong máy tính của bạn.
Lưu ý: Sn0wbreeze sẽ không bao giờ cập nhật baseband iPhone của bạn bất kể bạn chọn chế độ nào. Bước 7: Màn hình kế tiếp để bạn sẽ bắt đầu quá trình tùy biến. Nhấp vào nút General để bắt đầu. Bước 8:Trong màn hình General, có một loạt các tùy chọn để tùy chỉnh Jailbreak của bạn.
Chọn chế độ bạn muốn áp dụng cho Jailbreak của bạn và sau đó nhấp vào mũi tên màu xanh.
Bước 9: Màn hình tiếp theo cho phép bạn cài đặt trước các ứng dụng bên thứ 3 application/ tweaks . Nếu bạn muốn cài đặt và chọn chúng. Tiếp theo nhấp vào mũi tên màu xanh. Chọn Build IPSW và nhấn vào mũi tên màu xanh để tiếp tục quá trình tạo IPSW. Bước 11: Sn0wbreeze sẽ bắt đầu tạo IPSW tùy chỉnh với các tùy chọn mà bạn đã chọn. Quá trình này có thể mất từ 5 - 30 phút tùy thuộc vào tốc độ của máy tính của bạn. Một khi tập tin firmware được tạo ra trên màn hình desktop của máy tính của bạn.
Bước 12: Sau khi Sn0wbreeze tạo ra IPSW tuỳ chỉnh của bạn, bạn cần phải đặt iDevice của bạn vào chế độ DFU. Để bắt đầu quá trình này nhấn vào nút OK.Khi bạn nhấp vào nút OK, vào chế độ DFU để bạn có thể restore lại tập tin firmware IPSW của bạn tùy chỉnh. Lưu ý: iBooty sẽ được trích xuất vào máy tính của bạn một khi bạn đã tạo ra một tập tin firmware iOS tùy chỉnh 6./6.0.1 qua Sn0wbreeze v2.9.7. iBooty trong thư mục desktop trên máy tính của bạn và nhấp chuột vào iBooty.exe để khởi động iBooty. Bước 15: Từ đây chỉ cần chọn iDevice của bạn từ danh sách thả xuống. Sau khi khởi động vào chế độ tethered, bạn có thể chạy Cydia và bắt đầu cài đặt tinh chỉnh và ứng dụng ưa thích của bạn! Cydia chạy trên iOS 6.0.1
Bạn có một Jailbreak tethered iOS 6.0.1 bằng cách sử dụng công cụ Sn0wbreeze. Lưu ý. Do tính chất là tethered jailbreak, vì một lý do nào đó mỗi khi bạn tắt hoặc khởi động thiết bị, bạn phải khởi động iPhone bằng iBooty. Trích dẫn từ Redmond Pie. |
SNOWBREEZE 2.9.8
Downgrading: Use iFaith mode after selecting/downloading the appropriate IPSW for your device. You will then be prompted to browse for SHSH blobs for the IPSW you have selected. Remember to enter a PWNED DFU state with sn0wbreeze's iREB button in the top bar of sn0wbreeze prior to (SHIFT + Restoring) the custom signed IPSW! A5(X)/A6(X) Support?: As stated many times in the past, sn0wbreeze cannot be updated to work on A5(X)/A6(X) devices until a low level exploit in DFU or iBoot is found and made public. A5(X)/A6(X) Baseband Preservation/Hacktivation? For those running A5(X)/A6(X) devices and need to preserve your baseband, there is nothing you can do at the moment. For those wanting to hacktivate, the only advice I can give is to buy the carrier's SIM (the one its locked to obviously) on ebay. The SIM does not have to be activated with the carrier to activate the phone. Known Bugs/Issues: Windows 8 users currently need to use this workaround to run sn0wbreeze. First boot on an AppleTV 2 for 5.1/5.2 firmwares has funky glitches. Should be fixed by updates pushed via repos. iPad baseband will fail to flash on iOS 4.0 --> iOS 4.2.1 restores. iPod Touch 2G 4.x.x restores fail (fix coming soon). ***Hidden content cannot be quoted.*** |
|
tạo fw custom 6.x khi restore bị lỗi rơi vào SOFT DFU bác punlinh2007, 3gs lock 6.15, anh em nào trong trường hợp giống mình thì cẩn thận
|
đã có [h=2]sn0wbreeze v 2.9.11[/h]
Tình hình là vừa buil bản fw custom 6.1.2 cho 3gs bb 5.13.07 chạy thấy ổn, mà bản fw này đã có sẵn e 1.4 jb luôn chưa cần active. rất tiện ạ ! Thanks sn0wbee, hihi . |
|
các bro cho em hỏi em làm theo đúng y chang nhưng sau khi resdtore iphone ở chế độ dfu màn hình đen thui. em chỉ thành công trên 5.1.1
|
sn0wbreeze v2.9.14 released with 6.1.3 support
What is New? 2.9.14: After Cydia's mishap with aptickets from 6.0 --> 6.1.2 (causing soft-dfu loops), sn0wbreeze now includes an apticket validation. It will verify the apticket after browsing for iOS5+ blobs in iFaith mode. : Added tethered support for A4 devices on iOS 6.1.3 (3GS old bootroms are untethered as usual). |
Múi giờ GMT +7. Hiện tại là 06:13 AM |
© 2008 - 2024 Nhóm phát triển website và thành viên SANGNHUONG.COM.
BQT không chịu bất cứ trách nhiệm nào từ nội dung bài viết của thành viên.