Up firmware N91

[cpse.hcm]

JAF version 1.98.62
Detected PKEY: 9000DADF
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.17.0
Changing mode...Done!
Detected P-KEY: 9000DADF
P-key nokia module version 01.02
Init usb communication...
Reading product code...
Product Code: 0524312
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-43\

Searching for default location of ini...
Checking path: \Products\RM-43\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-43\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-43\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-43\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-43\rm43_v3.10.023.core
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-43\RM43_V3.10.023.01.variant
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,French,German,Italian,Spanish,Portuguese
Changing flashing settings...
Detected P-KEY: 9000DADF
P-key nokia module version 01.02
Init usb communication...
Reading...
Searching for default location of ini...
Checking path: \Products\RM-43\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-43\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-43\rm43_v3.00.060.core
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-43\RM43_V3.00.060.14.variant
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,Simpl Chinese,Trad Chinese
Backing up CRT...
Detected P-KEY: 9000DADF
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\358391000670753_CRT_backup_0202411.pm
Done!
Backup CRT OK!
Detected P-KEY: 9000DADF
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...w33_06w12v1 1.00.028.13
Reading battery value...3905 mV
Init usb flashing...
Reading flashid... 
CMT: 225000EC <=> SAMSUNG (SEC) -> K8S6415ETB
APE: 003600EC <=> SAMSUNG (SEC) -> K5E1212ACM
Verifing ADL communication... Status byte 2
Scanning selected flash files...
Found CMT ADL server in flash file...
Using CMT ADL Unistore Loader, len=45312
ADL -> Sending loader...
Loader sent...
Found APE ADL server in flash file...
Using APE ADL Unistore Loader, len=87040
ADL -> Sending loader...

Tới đó nó ko chịu chạy nữa
Hix
Có ai biết xin chỉ giáo
Thanks!!!