Cách này em lượm được trên net bà con cứ thử rồi cho kết quả mà theo tin vỉa hè là nó chạy Ok đấy.
1. Dùng cáp thường. Điện thoại tắt máy.
2. Chạy chương trình này
floader, tới menu Erase tab, chọn lạoi máy 7100. Bấm Start và giữ nút nguồn của máy điện thoại cho tới khi chương trình load xong (with household language speaking while the dark blue strip completely will not run) completely will not be filled.
4. Pass on Write tab, trong phần FLASH1 chọn là G7100P32_V103_07_XXX_XX (0715) AlchemyData.mot, In FLASH2 - G7100P32_V103_07_XXX_XX (0715) CodeData.mot.
Dowload V103 ở đây.
5. Press Start and hold the button of inclusion of the phone until then while the loader completely will not be filled. As current it was loaded - release the button (let off)!!! Otherwise the phone can not join after an insertion, or become bugged.
6. When writing complete, disconnect phone, remove and again cling the battery, and press ON button of inclusion of seconds 10-15. Not nervous, because phone is included after an insertion very long.
Sơ đồ cable cho máy LG 7100
keyboard up
18 IIIIIIIIIIIIIIIIII 1
2 - RX blanc
3 - TX blue
13 - GND noir + un autre cable pour lalimenter avec une pince croco
15 - 18 TOGETHER (ensembles)
16 - 17 together to +5V + un cable pour lalimenter avec une pince croco
Nói chung là unlock được nhưng mà hơi bị mỏi tay đấy