nếu bạn sải hwk mà gặp lỗi : Box Auth Error 20
thì làm những bước sau:
1. Run the update client.
2. Select your language.
3. Click "Next".
4. Wait until the "Update UFS Firmware" button is enabled and then click it.
5. Select req.fbi file, you will need to get this file from the support area.
6. After a few seconds the process will complete and create a file called xxxxxx.req. (where xxxxxx is your UFS serial number)
7. Send this file to your UFS reseller.
8. When you receive xxxxxx.fbi from your UFS reseller, perform steps 1-4 above.
9. Select xxxxxx.fbi
10. After a few seconds your box will be authorised.
Tạm dịch:
1. Chạy file update
2. Chọn ngôn ngữ
3. Click next
4. Đợi cho đến khi thanh "update UFS firmware" xuất hiện thì lick vào nó
5. Chọn file reg.fbi,bạn sẽ gặp file này trong vùng support
6. Sau một vài giây xử lí sẽ hoàn thành và tạo ra file: xxxxxx.reg (xxxxxx: là số seri box của bạn)
7. Gửi file này đến người bán UFS
8. khi bạn nhận đươc file xxxx.fbi từ người bán,làm lại từ bước 1 đến bước 4
9. Chọn xxxxx.fbi
10. Sau một vài giây box của bạn sẽ làm việc bình thường.
file reg.fbi mình gởi lên đây luôn:
Bước thứ 7, các bạn có thể gửi file này đến cho mình,mình sẽ tạo giúp file xxxxx.fbi cho các bạn.
REG.FBI