Cách giải quyết lỗi của hwk và nbox ở đây!

[thanhlong_company]

mình sẽ post 1 số kinh nghiệm về các lỗi anh em dễ gặp phải khi sử dụng ufs,nbox,hwk tại đây!

[tanlapfireco]

nếu bạn sải hwk mà gặp lỗi : Box Auth Error 20
thì làm những bước sau:
1. Run the update client.
2. Select your language.
3. Click "Next".
4. Wait until the "Update UFS Firmware" button is enabled and then click it.
5. Select req.fbi file, you will need to get this file from the support area.
6. After a few seconds the process will complete and create a file called xxxxxx.req. (where xxxxxx is your UFS serial number)
7. Send this file to your UFS reseller.
8. When you receive xxxxxx.fbi from your UFS reseller, perform steps 1-4 above.
9. Select xxxxxx.fbi
10. After a few seconds your box will be authorised.
Tạm dịch:
1. Chạy file update
2. Chọn ngôn ngữ
3. Click next
4. Đợi cho đến khi thanh "update UFS firmware" xuất hiện thì lick vào nó
5. Chọn file reg.fbi,bạn sẽ gặp file này trong vùng support
6. Sau một vài giây xử lí sẽ hoàn thành và tạo ra file: xxxxxx.reg (xxxxxx: là số seri box của bạn)
7. Gửi file này đến người bán UFS
8. khi bạn nhận đươc file xxxx.fbi từ người bán,làm lại từ bước 1 đến bước 4
9. Chọn xxxxx.fbi
10. Sau một vài giây box của bạn sẽ làm việc bình thường.
file reg.fbi mình gởi lên đây luôn:
Bước thứ 7, các bạn có thể gửi file này đến cho mình,mình sẽ tạo giúp file xxxxx.fbi cho các bạn.
REG.FBI (http://www.4shared.com/file/28021049/fffc82ca/Req.html)

[petrosetco]

cái này nguyên bản English.
các lỗi thường gặp khi update HWK
Error messages:
1 HWK SD REPAIR ERROR:
xxxxx
HWK upgrade error. This error occures when HWK was affected by third-party tools before upgrade or your HWK is a clone. Please don't contact anyone, it's your own stupid fault.
2. Your account is suspended. Please contact your reseller:
Your account is blocked by administrator. Please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
3. No more upgrade logs
HWK module with this serial number was already upgraded. If you already upgraded your HWK, you need not to upgrade it again until directed. If you haven't tried to upgrade it yet, get this error on upgrade and cannot run latest software versions, please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
4. Server is going to shutdown. Please try update in 20 minutes
Server is being stopped by administrator. Please try upgrade process again in 20 mins.
5. Account for this HWK module does not exist on server. Please contact your reseller
Account for HWK number with this serial does not exist on server. Please contact your reseller.
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
6. Authorization failed! Are you using the latest HWK Upgrade client software version?
Server authorization error. Please ensure you are using the latest UFS suite and upgrade client software versions
7. Your account was closed by the server administrator. Please contact your reseller!
Your account on server was closed by administrator. Please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
8. Error: Your update client version is expired! Please download new client from the support area and start the upgrade again
Download new upgrade client from support area and try upgrading your HWK module with it.
9. Error upgrading applets: HWK UPDATE ERROR: xxxxxx
Hardware problem occured during upgrade process. Please contact your reseller.
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
10. Error connecting to ufs: hwk login error: xxxx
Error establishing data transmission channel with HWK module. Please ensure your module is present and is correctly installed. If you are unable to solve the problem by yourself - please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
11. Authentication stage error: Server reported error:Not translated!Please select English language om the software's welcome page and retry upgrade process. Now error message will be shown correctly
12. Connection to server failed: Socket Error # 10061
Connection refused.Please disable or uninstall all installed antivirus and firewall software and retry upgrade operation. If the error persists, please ensure, that your internet provider is not using firewall also
13.Authentication stage error: Socket Error # 10053Software caused connection abort.
General TCP/IP failture occured. Please disconnect from internet (having your modem switched off for example), wait for 5-7 minutes and connect to internet again and retry upgrade process.
14. Authentication stage error: Socket Error # 10054Connection reset by peer.
TCP/IP connection to server from your PC is unstable. Please try to connect to internet via different internet provider. If you have no such possibility, please try to perform upgrade process several times until you get positive result.
15. Connection Closed Gracefully
Connection to server was suddenly terminated. Please retry upgrade process a bit later or try to connect to the internet via another internet provider and retry the upgrade.
16. Authentication stage error: Error: Server returned unrecognized reply
You are using an old version of the update client, please install the latest HWK Suite and use the update client from that version.

[dthduong]

ban lam on goi dum minh file xxxxx.fbi

[chanvietco]

Hic,các bác giỏi tiếng anh quá,em đọc chẳng hiểu mô tê gì cả.Bác WAPGPRS hiểu rồi làm ơn dịch giùm em với!Thanks!

[nhungnguyen122]

nó báo như vậy là sao hả bác, bác chỉ giáo em với em cảm ơn bác nhiều:mrgreen:
của em đòi file *72360*.fbi bác oai bác có gửi em với

[ctycblsbinhan]

tui cài driver máy tính nhận ufs ok nhưng khi đọc máy điện thoại thì đọc không thấy

[phuochiep_corporation]

còn chương trìng của em đó báo là.mong các pro chỉ giáo.em thanks:evil:

[thanhlongsctb]

sao em ko tim thay file support

[phongthoa]

cuu toi voi -Authentication stage error: Server reported error:Not translated!Please