RomPatcher+ v2.3 final version

[tritinqn]

RomPatcher+ 0.8 (Beta Version)

RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn

This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced support for a new tag: "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: two new options available "Dump Rom" and "Dump SuperPage".
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Improved: the shadow ram memory is now fully released when a patch is removed.
- Improved: better compatibility (supports the new OmniaHD and probably future devices).
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.


a change-log:


+ New: "Patch Info" option is now available and working.
+ New: An official webpage for RomPatcher+ has been created.
+ Fixed: The autostart configuration get corrupted after a while.
+ Fixed: DumpRom command now correctly unlock the file if the operation is cancelled
+ Improved: Removed the version number information from the "System Info" menu'. (it is already shown in the menu' About...)
+ Improved: Changed the order of the options in the menu' to make easier to select "Add to Auto / Remove from Auto"
+ Improved: Updated credits.
+ Removed: DisableCaps.rmp and Open4All.rmp patches have been removed.


How to install
There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus0.8.sis
2) If your phone has been hacked and has the Leftup root ca, then sign the RomPatcherPlus0.8.sis using the Leftup certificate and install it.
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy the patcher.ldd in c:\sys\bin\ folder




Currently RomPatcher+ is in BETA stage, so, use it at you own risk!
If you apply the same patch with both rp and rp+, it will be successfully applied only by the first one, the other will report the red icon error...


Update.


RomPatcher+ v2.2 final version


04/12/2009

RomPatcher+ v2.3 (Final Version)
http://www.gsm.vn/forum/main/1524758-13-post/

[anhthaiscg]

RomPatcherPlus v0.90.600 Test Version By Il.Socio

ROMPATCHER+ 0.9(600) BETA


How to install

There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus0.9(500).sis
2) If your phone has been hacked and has the Leftup root ca, then sign the RomPatcherPlus0.9(500).sis using the Leftup certificate and install it.
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder


Patcher.ldd Not Found Error

If you launch RP+ immediately after it has been installed you could get the "patcher.ldd not found" error.
Just reboot the device and launch again RP+


Change-Log BETA 0.9 (600)

+ Fixed: restored compatibilty with OmniaHD
+ New: added patches Open4All and Open4All_N96

Change-Log BETA 0.9

+ Fixed: was not compatible with some devices (eg. E63). The error message "patcher.ldd not found" was shown always also after a reboot.
+ Fixed: some patches were not applied due to additional spaces in the .rmp... Now additional spaces should be handled correcly.
+ Fixed: crash when trying to patch an executable that was missing in the device.
+ Improved: better parsing of the patch file. Both windows and unix text should be handled properly, with unicode/utf8/ascii encoding.
+ New: added LoadPatch/CheckPatch/ApplyPatch logs to the Engine, to check the correct patch parsing... <-- I know these popups are really annoying, but in order to release the final verion I need to be sure that (almost) ALL the RP patches will work correctly on RP+ also.
+ Removed: autostart correctly works, so popups have been removed (however, other popups have been added to the Engine, so you'll see popups for each patch you put in autostart)

"Warning: If you like this software, support rp+ with a donation otherwise its development will be definitely suspended on 7th September."

 
 Symbian Toys - Software RomPatcher+ to customize your Symbian phone.

[anphafurniture]

RomPatcher+ v2.0 (Final Version)

RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn

This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced support for a new tag: "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: two new options available "Dump Rom" and "Dump SuperPage".
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Improved: the shadow ram memory is now fully released when a patch is removed.
- Improved: better compatibility (supports also the new OmniaHD, 5630, E52 and probably future devices).
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.



Warning Message:
Feel free to post RP+ v2.0 on forums or everywhere you like, I want just kindly ask you to include the warning message below which is important for the survivor of the project:
Warning: If you like this software then support RP+ with a donation, otherwise its development will be definitely suspended on 7th September.

 
http://www.symbian-toys.com/rompatcherplus.aspx 

Change-Log v2.0:
+ Fixed: The message "Application not compatible with the phone" is not shown anymore.
+ Fixed: Replaced the Open4All_N96 templove's version with wadowice's version.
+ Fixed: Sometimes the green\red patch icon wasn't showed properly
+ Improved: Touch Support, the tap will select the patch, a tap on a selected patch will apply/remove it
+ Improved: Patches can be placed in any drive, RP+ will follow the order Z: -> A: and will use the first drive which contain the \patches\ folder
+ Improved: Error messages will report the patch's name also.
+ New: Popup when launching RP+ to remember to everyone the 6th September deadline.
+ New: ApplyAll/RemoveAll options to quicly Apply/Remove all the patches.
+ New: Donate options menu...
+ Removed: Apply/Remove options have been removed because redundant. Just click on a patch to apply/remove it.
+ Removed: The annoying popups for apply patch have gone Smile yeppi!!!
+ Removed: The advanced menu' has been temporary removed, it will came back again with more options available like "Dump/View any user choosen area of memory"...


How to install:
There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus0.9(500).sis
2) If your phone has been hacked and has the Leftup root ca, then sign the RomPatcherPlus0.9(500).sis using the Leftup certificate and install it.
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder


Patcher.ldd Not Found Error:
If you launch RP+ immediately after it has been installed you could get the "patcher.ldd not found" error.
Just reboot the device and launch again RP+


Upgrade Error:
If you installed any previous beta version and you got this error when installing final version, please delete both e:\patches\open4all.rmp and e:\patches\open4all_n96.rmp and try again.

[dt-furniture]

Ờ, bộ hack này sử dụng được trên máy 5630 không nhỉ?

Hờ, không ai trả lời à?

[vntsinh]

RomPatcher+ v2.00 (S60v3-v5)- iPhoniZ By Nima79




Warning Message:
Feel free to post RP+ v2.0 on forums or everywhere you like, I want just kindly ask you to include the warning message below which is important for the survivor of the project:
Quote: Warning: If you like this software then support RP+ with a donation, otherwise its development will be definitely suspended on 7th September.

http://www.symbian-toys.com/rompatcherplus.aspx

Change-Log v2.0:
+ Fixed: The message "Application not compatible with the phone" is not shown anymore.
+ Fixed: Replaced the Open4All_N96 templove's version with wadowice's version.
+ Fixed: Sometimes the green\red patch icon wasn't showed properly
+ Improved: Touch Support, the tap will select the patch, a tap on a selected patch will apply/remove it
+ Improved: Patches can be placed in any drive, RP+ will follow the order Z: -> A: and will use the first drive which contain the \patches\ folder
+ Improved: Error messages will report the patch's name also.
+ New: Popup when launching RP+ to remember to everyone the 6th September deadline.
+ New: ApplyAll/RemoveAll options to quicly Apply/Remove all the patches.
+ New: Donate options menu...
+ Removed: Apply/Remove options have been removed because redundant. Just click on a patch to apply/remove it.
+ Removed: The annoying popups for apply patch have gone Smile yeppi!!!
+ Removed: The advanced menu' has been temporary removed, it will came back again with more options available like "Dump/View any user choosen area of memory"...


How to install:
There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus0.9(500).sis
2) If your phone has been hacked and has the Leftup root ca, then sign the RomPatcherPlus0.9(500).sis using the Leftup certificate and install it.
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder


Patcher.ldd Not Found Error:
If you launch RP+ immediately after it has been installed you could get the "patcher.ldd not found" error.
Just reboot the device and launch again RP+


Upgrade Error:
If you installed any previous beta version and you got this error when installing final version, please delete both e:\patches\open4all.rmp and e:\patches\open4all_n96.rmp and try again.

[truongvinh01]

RomPatcherPlus 2.0.200 BETA

supplied by il.socio

New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Mactxt for all the details.
+ New: added new commands, info: return: error: check the demo1-4.rmp patches included.
+ New: Added support for the Warning/Yellow Icon
+ Improved: When applying a patch the error messages and the yellow icon will be shown ONLY if exists the path c:\resource\ErrRd (ErrRd can be a file or a directory). Disabled by default, because these features are useful to the patch-makers only, but could confuse the end-users. To enable them, just create the file or folder c:\resource\ErrRd
+ Improved: The same Open4All.rmp file can now be used to patch all the devices (including N96)
+ Improved: Changed text in the menu' "Remove Patch" has been replaced with "Disable Patch"
+ Fixed: Restored the "LDD Not Found" error message in case that the LDD file is missing

[newducduy]

RomPatcher + v2.1

RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn.
Using RomPatcher+ it is possibile to reach a new level of customization for you Symbian phone.

This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced the new command "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: introduced support for a new commands, info: return: error: check the demo1-4.rmp patches included.
- New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Fixed: RP+ can correcly patch contiguous shadow ram pages without any crash.
- Improved: the shadow ram memory is now fully released when a patch is removed.
- Improved: better compatibility (supports also the OmniaHD, 5630, E52 and probably future devices).
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.

Warning Message:
Feel free to post RP+ v2.1 on forums or everywhere you like, I want just kindly ask you to include the warning message below which is important for the survivor of the project:
Quote:
Warning: If you like this software then support RP+ with a donation.

  http://www.symbian-toys.com/rompatcherplus.aspx                                 

Change-Log v2.0 > v2.1:
+ New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
+ New: Added new commands, info: return: error: check the demo1-4.rmp patches included.
+ New: Support for the Warning/Yellow Icon
+ Improved: When applying a patch the error messages and the yellow icon will be shown ONLY if exists the path c:\resource\ErrRd (ErrRd can be a file or a directory). Disabled by default, because these features are useful to the patch-makers only, but could confuse the end-users. To enable them, just create the file or folder c:\resource\ErrRd
+ Improved: The same Open4All.rmp file can now be used to patch all the devices (including N96)
+ Improved: Changed text in the menu' "Remove Patch" has been replaced with "Disable Patch"
+ Improved: Changed Options Menu, "All Patches > Apply / Disable"
+ Improved: Can start also if the configuration file get corrupted.
+ Improved: Can patch large executable files up to a maximum of 5Mb


How to install:
There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_2.1.sis
2) If your phone has been hacked and has the Leftup root CA, then just install the RomPatcherPlus_2.1.sisx
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder


Patcher.ldd Not Found Error:
If you launch RP+ immediately after it has been installed you could get the "patcher.ldd not found" error.
Just reboot the device and launch again RP+

[hq]

mod cho em hỏi ah: file patcher.ldd và patchershadow.ldd phải tìm ở đâu để copy to Sys/Bin? Em đã cài được RP+ và mở được các folder hệ thống Private và Sys rồi nhưng không tìm thấy các file này?

[forimex]

RomPatcher + v2.1.400 beta

Changelog 2.1 > 2.1.400
+ New: it is now possible to search / filter the patches in the list. Just start typing the patch name to apply the filter.
+ New: the wildcard "****" is now available for patch-makers.
eg. SnR:sys\bin\installserver.exe:0011?****?02233043:0 02 8??E00B20C043
(NOTE: 3rd byte will be kept unchanged)
+ Fixed: in the SnR command, only the first instance was patched successfully. Wasn't possible to patch further instances of the same byte pattern.
+ Fixed: memory corruption when the patch contains 2 or more changes to a RAM memory address (not in the ROM range) and the "apply patch" fails.
+ Fixed: red-icon is shown like in RP by ZoRN, ie. if the patch doesn't perform any change to the memory the red-icon will be shown (eg. when a patch contains only comments or unmatched SnR lines)

[qhai959]

RomPatcher+ v2.2 final version

RomPatcher+ is an improved and fixed version of the RomPatcher software developed by ZoRn.
Using RomPatcher+ it is possibile to reach a new level of customization for you symbian phone.

This is the list of the main differences in comparison with RomPatcher by ZoRn:
- New: it is now possible to apply/remove patches with just 1 click.
- New: added vertical scrollbar.
- New: introduced the new command "+SuperPage" which allow to patch the RAM area where is stored the SuperPage.
- New: introduced support for a new commands, info: return: error: check the demo1-4.rmp patches included.
- New: introduced #ifdef, #ifndef, #else, #endif, #define statements. This will allow to retrieve system values at runtime to create more flexible and powerful patches. Check the ReadMe_Macros.txt for all the details.
- New: you can search / filter the patches in the list. Just start typing the patch name to apply the filter.
- New: wildcard **** support for patches.
- Fixed: Kern-Exec0 error when closing RomPatcher after a patch was applied.
- Fixed: doesn't unexpectedly crash when using large and complex patches.
- Fixed: RP+ can correcly patch contiguous shadow ram pages without any crash.
- Improved: the shadow ram memory is now fully released when a patch is removed.
- Improved: better compatibility (supports also the OmniaHD, 5630, E52 and probably future devices).
- Improved: the "Patch Info..." option shows all the information lines contained in the patch.

Warning Message:
Feel free to post RP+ v2.2 on forums or everywhere you like, I want just kindly ask you to include the warning message below which is important for the survivor of the project:

    
Warning: If you like this software then support RP+ with a donation.
http://www.symbian-toys.com/rompatcherplus.aspx              

Change-Log v2.1 > v2.2:
+ New: it is now possible to search / filter the patches in the list. Just start typing the patch name to apply the filter.
+ New: the wildcard "****" is now available for patch-makers.
eg. SnR:sys\bin\installserver.exe:0011********02233043:0028??E00B20C043
(NOTE: 3rd byte will be kept unchanged)
+ Improved: changed installer to place Open4All_RP+ patch in the proper drive.
+ Fixed: in the SnR command, only the first instance was patched successfully. Wasn't possible to patch further instances of the same byte pattern.
+ Fixed: memory corruption when the patch contains 2 or more changes to a RAM memory address (not in the ROM range) and the "apply patch" fails.
+ Fixed: red-icon is shown like in RP by ZoRN, ie. if the patch doesn't perform any change to the memory the red-icon will be shown (eg. when a patch contains only comments or unmatched SnR lines)


How to install:
There are 3 different ways to install RomPatcher+
1) If your phone has been hacked to allow installation of unsigned .sis then install RomPatcherPlus_2.2.sis
2) If your phone has been hacked and has the Leftup root CA, then just install the RomPatcherPlus_2.2.sisx
3) Otherwise, you can sign and install the "Lite Version", using a DevCert or OpenSigned Online. But, in this case, you MUST also manually copy BOTH the files patcher.ldd and patchershadow.ldd in c:\sys\bin\ folder


Patcher.ldd Not Found Error:
If you launch RP+ immediately after it has been installed you could get the "patcher.ldd not found" error.
Just reboot the device and launch again RP+


Useful tip for patch-makers:
If your patch uses some features of RP+ v2.2 and above (like **** wildcard) I suggest you to include in your patch a check, like the one here below:

     #ifdef RP+VERSION_2.0
    #define NOT_COMPATIBLE
#endif

#ifdef RP+VERSION_2.1
    #define NOT_COMPATIBLE
#endif

#ifdef NOT_COMPATIBLE
    error: Please update to RP+ v2.2 or above to use this patch!
#endif

; your patch code goes here...