Đây là toàn bộ hướng dẫn các bạn thử nhé , mình chưa cầm phone nên chưa thử được:
Preparation
SHBreak, ISTweak, a terminal emulator to install.
1. Backup the current kernel
At SHBreak, press the Break button. Copy AU to start again
SU valid at ISTweak.
Launch a terminal emulator.
In order to run the following command (press Enter)
su
cat / dev/mtd/mtd3ro> / data / local / recovery.img
cat / dev/mtd/mtd0ro> / data / local / boot.img
normal boot image mtd0, and recovery images for the mtd3.
Please manage this backup on your own.
2. editing boot.img
Move the PC to copy boot.img data / local
Open a binary editor.
Make changes to run as a service for autoexec.sh.
Inserting the autoexec.sh is find and examine yourself.
You have put an example.
http://dl.dropbox.com/u/15357241/1.jpg
Before the change
http://dl.dropbox.com/u/15357241/2.jpg
Revised
After changing the alias (and mtd02.bin) to save, SH-copying data / local of 12C
3. Clear nandlock, roasted kernels
Working in SH-12C. If you did not take root and temporary ISTweak SHBreak effective in SU again.
http://dl.dropbox.com/u/15357241/nandunlockshspamp ,
http://dl.dropbox.com/u/15357241/flash_image,
to save data / local groups and a series of files autoexec.sh
http://www1.axfc.net/uploader/Sc/so/295510.zip
flash_image would be better to use a modification to not check the first 2048 bytes.
Run the following command in a terminal emulator
su
cd data / local
. / Nandunlockshspamp 0xc08a9648
y
. / Flashimage recovery ./mtd02.bin
reboot recovery
After restarting, if successful launches android normal.
4. Root
You can use IS03rootswitcher. Effective root of a single button can be switched off.
We recommend that you install the Superuser have taken root.
Ability
10/5/2010
Bên nhật đã root và nanunlock được rồi
)): Có thể dùng cách này để root Au smartphone được ko? Thấy bên xda-developers.com có tay bảo root được HTC Evo 4G (ISW11HT) rồi kìa.
Dạng hẹp
